Last Updated on August 11, 2024 by Ali Hamza
Struggling with Linksys router white power LED issue? Is your answer is in a big yes, then this post is for you. Using the troubleshooting tips given in this how-to post, you can easily get rid of Linksys router white power LED issue in no time. Let’s begin!
Why Am I Getting White Power LED on My Linksys Router?
Before we take you through the troubleshooting tips to fix the white power LED on Linksys router, let’s first help you find the reasons behind the issue:
- Issues with your WiFi connection
- Longer hours of inactivity also lead you to the white power LED issue on your Linksys router
- Your Linksys router is not connected to your modem
- The Ethernet connection is not properly established between your Linksys router and client devices
- Your Linksys router is running an outdated firmware version
- Issues from your ISP’s end
- Viruses or malware on your system
- Incomplete Linksys router setup
How to Fix Linksys Router White Power LED Issue?
Given-below are some effective troubleshooting tips to resolve Linksys router white power LED issue:
Reboot Your Linksys Router
Rebooting is one of the easiest troubleshooting tips to fix Linksys router white power LED issue. Here’s how to reboot your Linksys router:
- First things first, turn off the power supply for your Linksys router.
- Wait for some time.
- Turn on your Linksys router again.
- The power LED on your Linksys router will blink for some time and after that become stable.
- Connect your Linksys router to your modem using an Ethernet cable.
Check the Cable Connections
Another thing that you can do to fix Linksys router white power LED issue is to check the cable connections. At times, the cables might not be connected to the Linksys router properly due to which you are struggling with the issue.
So, to fix it, disconnect the cable and then reconnect it. However, if you find that the Ethernet cable you are using is damaged, replace it immediately.
Configure Your Linksys Router Properly
At times, white power LED on your Linksys router occurs due to improper or incomplete configuration. Therefore, visit Linksys router login page to configure your router properly and change its settings as per your requirements.
Update Your Router’s Firmware
Outdated or corrupted firmware version may also make your Linksys router power LED blink white. To fix the issue, update your Linksys router firmware by following the steps listed below:
- Download the latest firmware.
- Update from the official website of your router.
- Save the file on your PC.
- Turn on your Linksys router and connect it to your modem.
- Launch a web browser on a PC or laptop and enter the default Linksys router IP address in the URL bar field.
- Press Enter.
- Enter the default Linksys router login password.
- Click on Firmware Upgrade under Administration.
- Thereafter, click on Browse or Choose File (depending upon your router’s model).
- Now, select the downloaded firmware file and click on Open.
- Click on Start Upgrade or Upgrade.
Note: Do not turn off your router during the firmware update process.
- Click on Continue when prompted.
Kudos! The Linksys router firmware has been successfully updated. Turn the Linksys router off and then turn it back after a few minutes.
Note: Updating the firmware on your Linksys extender (If you own the one!) is also important. So, after the Linksys extender setup process, search for the latest firmware updates available for it. And if you find any, update it right away.
In a Nutshell
So, these were some simple yet effective troubleshooting tips to get rid of the Linksys router white power LED issue. However, if the same issue is spinning your head or you have questions on how to setup Linksys router, contact our competent technical experts now via comments.
